|
The Blackhawk
USB2000 Controller is a small and
lightweight controller designed for the
unique requirements of the Texas Instruments
TMS320C2000 DSP developers.
Built upon the advanced technology of the
highly-popular USB510, this third generation
controller achieves the cost/performance
balance required by the C2000 development
community. The compact controller pod
requires no external power source. Power is
derived directly from the PC’s USB port.
The controller supports the standard 14-pin
JTAG header and voltage ranges from 3.3v to
5.0v. The USB host port permits
communications with the host PC and the
bi-color status LED gives visual indication
of the controllers state.
A free add-on to the USB2000 Controller is
the Blackhawk FlashBurn utility. This
scriptable utility follows the freely
available Texas Instruments API and
algorithms for programming C2000 devices
with on-chip flash. BHFlashBurn integrates
seamlessly with the Flash API allowing the
ability to Clear, Erase, and Program on-chip
flash on the target device.
Blackhawk also has available an optional
Isolation Adapter which protects from ground
loop voltage, harsh environments and new,
untested designs. Supports 3.3v-5.0v targets
with TI 14-pin connections.
Features
-
Super Low-Cost XDS510™-class
Controller.
-
Plug n’ Play USB Host Interface.
-
Bus
powered, no external power required.
-
Windows® Plug n’ Play Installation.
-
Supports TI C2000 Digital Signal Processors:
-
F283x
-
F281x
-
F280x
-
F280xx
-
LF240x
-
3.3/5.0 volt device I/O support.
-
Bi-Color Status LED (red/green).
-
Code Composer Studio v3.3 support.
-
Standard 14-pin JTAG Header
Connector.
-
Blackhawk FlashBurn utility add-on.
-
Optional Isolation Adapter available.
|
[
View Larger Image ] |
System Requirements
-
PC running Windows® 2000, XP, or Vista
-
15 MB of free hard disk
space
-
Available USB port
-
CD-ROM drive for driver
installation
-
512 MB RAM
|
