|
For Immediate Release
Corelis introduces a
boundary-scan controlled Digital I/O Module
that enables testing of Low Voltage Differential Signals (LVDS)
Use of IEEE-Std-1149.1
controlled parallel pin electronics
drastically reduces cost of digital testing including LVDS.
Jump to product page
Cerritos, CA, October 3, 2005 -- Corelis Inc., introduced today a
boundary-scan controlled ScanIO-300LV digital module targeted at
development, manufacturing, and service test applications for
printed circuit boards and complex IC’s. The ScanIO-300LV
Programmable Digital I/O module turns an IEEE–STD-1149.1
boundary-scan controller into a powerful digital interconnect
tester. It uses boundary-scan compatible logic to add control
and visibility to connectors, traces, and logic that are
otherwise not testable using traditional scan techniques. Each
line is an independently controlled bi-directional signal and
can be individually configured as an input or output or both.
ScanIO-300LV supports up to 300 (or 150 differential LVDS pairs)
boundary-scan controllable digital I/O lines per module.
Multiple ScanIO-300LV modules can be cascaded to support up to
thousands of digital I/O lines. The ScanIO-300LV integrates
seamlessly with the ScanExpressTPG Test Program Generator and
does not require modifying the UUT netlist or merging the UUT
netlist with the ScanIO-300LV data to create test patterns for
the combined configuration. This product will assist customers
in increasing the boundary-scan test coverage of their products.
"The use of the ScanIO‑300LV modules to augment boundary scan testers can
significantly lower test development cost and greatly enhance
test coverage, thus reducing time to market, lowering test costs
and improving product quality." - said Steve Hartman, product
marketing manager of Corelis Inc. "Compared to traditional test
strategies involving in-circuit testers, boundary-scan in
combination with a ScanIO‑300LV module to cover non-scanable
nets provides a tremendous savings in both hardware and software
cost."
The ScanIO-300LV is available from stock.
Corelis Inc., offers a broad line
of boundary-scan software and hardware products that combine
exceptional ease-of-use with advanced technical innovation.
Corelis’ ScanPlus and ScanExpress Boundary-Scan systems are used
for interconnect testing as well as in-system programming of
Flash memories, CPLDs and FPGAs. Corelis’ systems include a
complete range of IEEE-1149.1-compatible boundary-scan testers
for PCI, PC-Card, 10/100 LAN, USB 2.0, cPCI/cPXI, and VXI host
interfaces. Corelis also offers a full-line of JTAG emulation
and debugging tools. Corelis provides custom test engineering
services and is well known for its outstanding customer support.
# # # # |
